Most radio stations broadcast in stereo, but you need a strong signal to avoid hiss. Auto handles this for you, but the overrides are here if you need them.
Hilly terrain and urban areas can scuff up FM signals even if the power stays strong. Turn this on if you see holes and hear static in a strong signal. Keep it off otherwise.
Reception
Change how hard the radio squints for signals. Auto is fine for daily listening, Manual is an easy override if the radio isn't cooperating. Pro turns off all safeguards and gives you full control of the gain. Debug register hacks available at: Advanced RF tools ↗
Changes how wide the radio can see. Narrowing is slightly better for weak signals, but blinds your waterfall. Wider lets you see more of the waterfall, but easily overwhelms your radio.
+0.000 MHz
The radio dongle you're using is likely overwhelmed by powerful stations even when your settings are set correctly. Use this if you spot interference that goes away if you tune one notch over.
Stations
Fresh clears your station list and scans the whole band from scratch. Update keeps what you have and only adds stations that are new or changed — faster if you've moved a few miles.
A rare few FM stations may hide extra audio above the range you can hear. If you find one it's usually reading services for the blind or elevator music. No active list exists for these hidden services, so try your luck here!
Network
Normally the radio starts with a safety cushion of buffered audio and only trims it once it trusts your connection. LAN mode skips that and runs at the lowest delay right away. Great on a wired network — on anything flaky the audio will stutter, and it won't back off on its own.
Source
Device
Multiple dongles? Pick the one to use.
Host
Port
Run rtl_tcp -a 0.0.0.0
on the host.
Clip Recording
Clip Length 15 sec
Records the last 15 sec of audio from the current
station into a file.